*MARKER* 0

541-746-9092

Traditional Metal Dual Bank Battery Management Panel by Blue Sea Systems
    Close Traditional Metal Dual Bank Battery Management Panel by Blue Sea Systems

    Traditional Metal Dual Bank Battery Management Panel by Blue Sea Systems

    Product Code: 8280

    Price: $120.00

    Traditional Metal Dual Bank Battery Management Panel by Blue Sea Systems

    Includes [3] m-Series, ON-OFF Battery Switches PN 6006 Isolates Engine circuit from House circuit Allows independent battery control Allows emergency cross connect between isolated battery banks The addition an Automatic Charging Relay (ACR) automates charging two battery banks Protects electronics from sags and spikes caused by engine cranking Ignition protected - Safe for installation aboard gasoline-powered boats

    Specifications Maximum Voltage 48V DC Continuous Rating The maximum current a switch is designed to conduct for an indefinite period. 300A Intermittent Rating The maximum amount of current a switch is designed to carry for a minimum of a designated period of time. 500A (5 min) Cranking Rating 10 sec Normally associated with 'cranking current' which is the current required by the starter circuit prior to engine starting. The cranking current varies significantly during the starting cycle. Initially, there is a large surge of current required to overcome the inertia and compression of the engine. This surge can be two to four times the average cranking current. Once the engine is turning there are peaks and valleys as the pistons go through the compression and exhaust cycles. The cranking current rating is used for sizing batteries, cables, and battery switches. 1500A Cranking Rating 1 min The maximum amount of current a switch is designed to carry when starting an engine when the cranking period does not exceed 1 minute. 775A Height 7.50in (190.5 mm) Width 6.25in (158.75 mm) Depth 2.25in (57.15 mm) Weight 3.20lb (1.45 kg)